Supplies/Fitting

In my last post I mentioned the balsa and mesh that I picked up at a fiberglass repair shop.  As you can see it is just little balsa blocks with a mesh holding it together.

As you can see in this picture I have cut the balsa to fit the front deck.  Remember the boat is upside down in this picture.  It looks like the cabin floor but it is actually the underside of the front deck.  Ideally I would have had a big sheet and cut it to fit.  However, because the price was right I used a bunch of small remnants from the fiberglass shop.  I hope to get this all glassed in real soon.  More pictures to come.